Get Your Free Texas CDL Driver's License Guide

Understanding Texas CDL Requirements and Classification

A Commercial Driver's License (CDL) in Texas is a special type of driver's license required to operate certain commercial vehicles on public roads. The Texas Department of Public Safety (DPS) oversees CDL issuance and compliance with federal regulations set by the Federal Motor Carrier Safety Administration (FMCSA).

Free Guide to Dental Implant Programs in Los Angeles →

Texas recognizes three classes of CDLs, each designed for different types of commercial driving. A Class A CDL allows you to operate combination vehicles with a Gross Vehicle Weight Rating (GVWR) of 26,001 pounds or more, where the towed vehicle weighs more than 10,000 pounds. This includes tractor-trailers and other large combinations. A Class B CDL permits operation of single vehicles with a GVWR of 26,001 pounds or more, or any such vehicle towing a vehicle not exceeding 10,000 pounds. This covers dump trucks, concrete mixers, and large buses. A Class C CDL is required for vehicles carrying 16 or more passengers (including the driver) or hazardous materials in certain quantities.

Beyond these basic classes, CDLs include endorsements that reflect additional skills or clearances. The Hazmat endorsement allows transport of hazardous materials. The Tanker endorsement is required for vehicles carrying liquid cargo in bulk. The Passenger endorsement covers buses carrying passengers. The Double/Triple Trailer endorsement permits towing multiple trailers. Understanding which class and endorsements you need depends on the specific commercial driving work you plan to perform.

The Texas CDL testing process is comprehensive and structured. According to Texas DPS data, approximately 1.2 million Texans hold active CDLs. The testing involves a written knowledge exam covering traffic laws, vehicle inspection, and safe driving practices, followed by a practical driving test. Most individuals preparing for CDL testing spend 40 to 60 hours in formal training before attempting the exams.

Practical takeaway: Determine which CDL class matches your intended commercial driving work before beginning preparation. Review the specific endorsements required for your occupation, as these may require additional testing or training beyond the basic CDL requirements.

Medical Certification and Physical Requirements

All CDL holders in Texas must obtain and maintain a valid medical certificate. This certificate confirms that you meet federal medical standards for operating commercial vehicles. The Federal Motor Carrier Safety Administration establishes these medical standards, and they are legally required before you can be issued a CDL or renew an existing CDL.

Learn About Calculating Fuel Costs for Trips →

The medical examination must be performed by a certified medical examiner listed on the National Registry of Certified Medical Examiners. During this examination, the doctor assesses several physical and mental conditions. Vision requirements include corrected or uncorrected vision of at least 20/40 in each eye and 20/20 in at least one eye. You must have a field of vision of at least 70 degrees in the horizontal meridian of each eye. Hearing ability is tested, with acceptable hearing meaning you can hear a forced whisper at three feet with or without a hearing aid.

Blood pressure and cardiovascular health are evaluated. The medical examiner checks for conditions like diabetes, epilepsy, or other seizure disorders, which may disqualify you or require special certification. Mental and emotional stability is assessed through questioning about depression, anxiety, or substance abuse history. Certain medications that cause drowsiness or impair judgment may conflict with CDL operation. The examination also includes assessment of motor coordination and overall physical condition necessary for operating large vehicles.

The medical certificate is valid for either two or four years, depending on your health status and the examiner's assessment. You must carry proof of this certificate when driving a commercial vehicle. If you fail the medical examination, the examiner provides information about disqualifying conditions and may recommend you seek treatment or management for certain health issues before attempting another examination.

Texas law requires this medical certificate to be renewed before expiration. Driving with an expired medical certificate is a violation and can result in loss of CDL privileges. The cost of a medical examination typically ranges from $75 to $150, and you pay this cost directly to the medical examiner—it is not covered by government programs.

Practical takeaway: Schedule your medical examination with a DPS-certified examiner before applying for your CDL. Keep documentation of your medical certificate with you at all times while driving commercially, and mark your calendar to renew before the expiration date.

Knowledge Exam Content and Study Areas

The Texas CDL knowledge exam tests your understanding of commercial driving safety, vehicle operation, and federal regulations. The general knowledge test covers material that all CDL holders must know. For a Class A or B CDL, you answer 50 questions, and you must score at least 80 percent to pass. For a Class C CDL, the exam contains 30 questions with the same passing standard.

Get Your Free Laptop Keyboard Connection Guide →

The general knowledge portion covers traffic laws specific to commercial vehicles, including speed restrictions and braking distance requirements. You learn about vehicle inspection procedures—how to walk around and check your truck or bus before driving. The exam includes questions about load securement, ensuring that cargo is properly fastened and will not shift during transport. Safe driving practices make up a significant portion, covering topics like mirror checks, lane changes, backing up, and handling difficult road conditions.

The air brake system section is critical for most commercial vehicles. You must understand how air brakes differ from regular hydraulic brakes, including how to maintain proper air pressure, what warning lights indicate, and proper braking techniques. If your vehicle has air brakes, failure on the air brake portion of the test results in a restriction preventing you from operating air brake vehicles.

Combination vehicle material applies specifically to Class A licenses and covers how tractor-trailers handle differently than single vehicles. You learn about weight distribution, coupling and uncoupling procedures, and safe operation of these longer, heavier vehicles. Hazmat material questions apply if you are testing for a Hazmat endorsement and cover identification, loading, and transport of hazardous materials.

Endorsement-specific tests add additional questions. The Passenger endorsement exam covers emergency procedures, passenger safety, and proper operation of larger buses. The Tanker endorsement exam addresses the unique handling characteristics of vehicles carrying liquid cargo. Most study guides available from Texas DPS contain sample questions mirroring the actual test format.

Practical takeaway: Obtain the official Texas CDL study material from your local DPS office or their website. Focus your study on the specific class and endorsements you need. Practice with sample questions repeatedly until you consistently score above 85 percent before scheduling your actual exam.

The Practical Driving Test and Vehicle Inspection

After passing the knowledge exam, you must complete a practical driving test administered by DPS examiners. This test evaluates your ability to safely operate a commercial vehicle in real-world conditions. The practical test has three components: a pre-trip vehicle inspection, a basic controls skill test, and a road test.

Get Your Free DMV Registration Renewal Kiosk Guide →

The pre-trip inspection portion requires you to walk around and inspect the vehicle, pointing out or discussing critical safety items. You must identify items like tire condition, brake operation, lights and reflectors, mirrors, coupling devices, and cargo securement equipment. The examiner observes whether you conduct a systematic inspection and can communicate what you are checking. You typically have ten to fifteen minutes to complete this section. Common items inspected include tire tread depth (minimum 2/32 inch for steering tires, 1/16 inch for other tires), proper brake adjustment, working lights and reflectors, secure mirrors, and properly functioning coupling mechanisms.

The basic controls test measures your ability to maneuver the vehicle in a controlled setting. You are asked to perform specific driving tasks like straight backing, offset backing, alley dock backing, and parallel parking—depending on which CDL class you are testing for. These maneuvers test your spatial awareness and ability to control a large vehicle at low speeds. Each maneuver is scored based on how close you come to cones or lines without hitting them. Small deviations are generally acceptable, but hitting cones or striking any object results in automatic failure of that maneuver.

The road test portion typically lasts 30 to 45 minutes. You drive in varied traffic conditions including city streets, rural roads, and sometimes highway driving. The examiner observes your mirror checks, speed control, lane positioning, turning procedures, and overall vehicle control. You must demonstrate proper signaling, smooth acceleration and braking, safe following distances, and courteous interaction with other vehicles. Common reasons for failing the road test include improper mirror checks,